Part Number Hot Search : 
1N4757 EL502707 DG300BK ANALOG 12120 VTC5764B S2030 2SMA16
Product Description
Full Text Search
 

To Download DAC8 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Analog Standard Cell DAC8 - 8-Bit Digital to Analog Converter
DATA SHEET
Process
CUE (0.6 m)
General Description
This Macro Cell is an 8-Bit digital to analog converter.
Key Features
-
Functional Description
The architecture is based on two resistor dividers. Because of its high output impedance, which is also code dependent, it must be used together with a low offset operational amplifier at the output (e.g. OP03B). VRN and VRP must be within the common mode range of the opamp (e.g. between 1.5V and 3.5V).
Full 8-Bit Resolution and Linearity Small Area 0.044 mm; Size x = 216m, y = 202m Supply Voltage 5V 10% Only Single Power Supply Required
Symbol
Pinlist
Pin RP RN DACOUT b<7:0 Description Positive Reference Voltage Negative Reference Voltage Analog Output Data Input b(0) = LSB Cap.
Revision A, 26.11.02
Page 1 of 3
Data Sheet DAC8 - CUX
POWER SUPPLIES
The converter requires one power supply (vdda, gnd).
TECHNICAL DATA FOR 5V SUPPLY
(Tjunction = 0 to +85 C, VDDA = 5V 10%, unless otherwise specified)
GENERAL PARAMETERS
Symbol Vin Parameter Resolution Input Voltage Range VRP = 3.5V VRN = 1.5V VDD = 5V temp = 25 C VRP = 3.5V VRN = 1.5V VDD = 5V temp = 25 C VRP = 3.5V VRN = 1.5V VDD = 5V temp = 25 C 5.9 4.5 Conditions Min 8 VSS VDD Typ Max Unit Bit V
DNL
Differential Nonlinearity
0.25
LSB
INL
Integral Nonlinearity
0.25
LSB
Vos
Input Offset Voltage
0.25
LSB
Rref Vdd Idd PVdd Rout
1) 2)
Reference Impedance Power Supply Range Power Supply Current Power Consumption Output Resistance
8 5.0 0.13 0.13 21
1) 1)
10.7 5.5
kOhms V mA mW kOhms
2)
Vrefp - Vrefn = 1V Middle of the resistor string; Code: 0111 0111 (output resistance is code-dependent) Idd includes the current through the resistor string
TRANSIENT PARAMETERS
Symbol Ts Parameter Settling Time Conditions 5V, 25 C Cload = 30pF Min <1 Typ Max Unit s
Vout = (VRP - VRN) / 256 * code_in + VRN
Revision A, 26.11.02
Page 2 of 3
Data Sheet DAC8 - CUX
Contact
austriamicrosystems AG A 8141 Schloss Premstatten, Austria T. +43 (0) 3136 500 5333 F. +43 (0) 3136 525 5755 support@austriamicrosystems.com www.austriamicrosystems.com
Copyright
Copyright (c) 2002 austriamicrosystems. Trademarks registered (R). All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. To the best of its knowledge, austriamicrosystems asserts that the information contained in this publication is accurate and correct.
Revision A, 26.11.02
Page 3 of 3


▲Up To Search▲   

 
Price & Availability of DAC8

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X